Re: Unknown Leak in Lund-Rivet ?
[ Aluminum Boat and Repair Board ] [ Boat Motor Repair Board ]
Posted by Tom (158.111.4.25) on November 18, 2004 at 09:50:32:
In Reply to: Unknown Leak in Lund-Rivet ? posted by James Burtke on November 16, 2004 at 15:53:58:
James,
I have a 2002 Lund Alaskan and have only used it hard one season. It was bone-dry until a few months ago when it developed a leak. The leak may have been from me drilling and installing downriggers. I may have drilled through the inside hull under one of the side runners. Anyway, I took some Lab-metal and first sealed up the seam on the transom and took the boat out and it still leaked. I then sealed the starboard runner and lower seem all the way from the transom to the keel and it stopped the leak. 5200 is a good idea to find where the leak is but it won't last more than a few seasons.
I'd seal up a section and try it, then seal another section and try it until you find it.
I purchased Lab-Metal off the Internet from Caswell, Inc.
Responses:
- Re: Unknown Leak in Lund-Rivet ? James Burke 08:20:39 11/21/04
(0)
|
The Ez-Coil Spring Rewinding Tool |
|---|
