Aluminum Boat & Repair Board

This board is now dedicated to BOATS only.

Goto The Boat Motor Board to post messages about motors.
It you post messages about motors here, they will be removed.

_[ Post Message ]

This is not a for sale board so do not post any items for sale, rent or Ebay notices.

THIS BOARD IS UNDER REPAIR and POSTING HAS BEEN DISABLED

Postings about motors will be removed. Goto The Boat Motor Board
  • aluminum cabin on 25ft regal - brian 11:38:16 01/21/06 (1)
  • aluminum cabin on 25ft regal - brian 11:34:35 01/21/06 (0)
  • carpet kits - jeremy 23:52:33 01/19/06 (5)
  • thru haul Bronz or nylon - leon chouinard 22:54:51 01/19/06 (1)
  • Lund Decal and pinstriping - Tom 22:51:37 01/18/06 (2)
  • painting my aluminum boat - William HUghes 19:18:04 01/18/06 (1)
  • 10 ft Jon Boat... - J Lee 16:35:17 01/18/06 (2)
  • ALUMINUM BOAT REPAIRS DAMAGE RESTORATION - JD. DORSEY 11:43:50 01/18/06 (1)
  • Boat maker identification - Ed and Brian 09:23:07 01/18/06 (2)
  • Putting Deck in 12 FT aluminum Semi-V - Travis 05:07:29 01/18/06 (2)
  • Putting Deck in 12 FT aluminum Semi-V - Travis 05:07:03 01/18/06 (0)
  • Steel trailer - Scott 14:15:28 01/17/06 (9)
  • Bilge Pumps - Glenn 08:06:11 01/17/06 (4)
  • Alumacraft 1985 16ft classic deluxe transom - rm4pack @charter.net 18:36:49 01/16/06 (0)
  • what's happened to the boat motor board - bob 05:41:48 01/16/06 (1)
  • Duratech Aluminum Boat Info. Needed - Dean Manse 13:10:32 01/15/06 (0)
  • Duratech Aluminum Boat Info. Needed - Dean Manse 11:08:09 01/15/06 (5)
  • What epoxy to use on wood bench seats - Brian 10:37:04 01/15/06 (2)
  • Cable and pulley steering - ken 10:25:45 01/15/06 (1)
  • Green touchup paint for Alumacraft jon... - VinnyH 20:42:04 01/14/06 (4)
  • Green touchup paint for Alumacraft jon... - VinnyH 20:41:39 01/14/06 (0)
  • zinc chromate - Ernie 17:25:43 01/13/06 (3)
  • transum wood - Rick 21:28:58 01/12/06 (1)
  • transum wood - Rick 21:28:29 01/12/06 (0)
  • Purchasing a rivit gun and rivits - Glenn 15:41:38 01/11/06 (9)
  • Starcraft , Jupiter model boat - Chris Domian 06:26:36 01/11/06 (1)
  • zinc Chromate - Ernie 16:34:11 01/10/06 (2)
  • Mirrocraft - Al 18:15:13 01/09/06 (1)
  • Anyone considering Flotation Pods/Hull Sconces - marshall 18:07:31 01/09/06 (8)
  • pin hole in pontoon float - Jeff Brenneman 10:43:28 01/09/06 (2)
  • Whutsit? - Kelly Wood 19:12:57 01/07/06 (0)
  • Painting Aluminum with Rollers or Brushes - Wes 12:18:05 01/07/06 (2)
  • How should I put a floor and a cab in my boat? - Tim 12:10:06 01/07/06 (4)
  • rivets - Ernie 11:15:15 01/07/06 (1)
  • Reworking '80 starcraft - andy 08:53:07 01/07/06 (4)
  • how to fix a thin bottom on a flat bottom 14 ft john boat - Roger 07:47:23 01/07/06 (1)
  • Cracking ribs - Paul 19:41:18 01/06/06 (1)
  • Sealing an aluminum boat - JohnM 09:57:57 01/06/06 (1)
  • Flounder gigging lights - Gail 20:23:05 01/05/06 (3)
  • How much is my boat worth? - Woody Watkins 07:42:37 01/05/06 (5)
  • Leaking Center Seam in a Tracker - JT 10:16:47 01/04/06 (9)
  • starcraft flooring - Ernie Briggs 20:07:18 01/03/06 (3)
  • pontoons for jon boats - ed 19:29:12 01/03/06 (1)
  • Zinc Chromate Primer - Wes 18:22:30 01/03/06 (4)
  • Homemade boat cover ideas? - stborders 20:33:49 01/02/06 (2)
  • Installing a livewell - Chris 18:31:16 01/02/06 (8)
  • Adding Floors to a "V" Bottom starcraft - Tom Pavlak 21:14:25 01/01/06 (4)
  • Alright, so I did the research... - James Spicer 20:54:30 01/01/06 (4)
  • Weld / Rivet Aluminum - vince 17:47:46 01/01/06 (3)
  • Glueing Aluminum - george 16:30:40 01/01/06 (4)
  • how do you fix a couple small leaks from bottom of a aluminum fishing boat - dave 14:52:31 01/01/06 (1)
  • Painting an Aluminum 1980 Starcraft--16 ft v-hull - Shane Blackmer 19:45:16 12/31/05 (3)
  • how to you fix leaks in the bottom of a aluminum fishing boat - dave 15:00:11 12/31/05 (2)
  • Steering system replacement - James Spicer 14:14:02 12/31/05 (1)
  • question? - Tjones 00:41:36 12/31/05 (4)
  • small leaks on aluminumfishing boat how do you fix them? - dave 19:49:58 12/30/05 (1)
  • small leaks on aluminumfishing boat how do you fix them? - dave 19:49:22 12/30/05 (1)
  • fiberglass boat painting - jim frohlich 19:33:15 12/30/05 (1)
  • Which Primer To Use - Terry 18:34:30 12/30/05 (2)
  • Buying a '74 Starcraft - Rick K 16:31:57 12/30/05 (3)
  • rowboat advice - kim Bradshaw 15:07:47 12/30/05 (2)
  • Sand Blasting Aluminum Boat - Roger Williams 12:45:56 12/30/05 (4)
  • pontoon logs - Steve 00:48:38 12/30/05 (2)
  • pontoon logs - Steve 00:48:31 12/30/05 (0)
  • Smoker Craft Floor and Hull repair - vince 22:24:53 12/29/05 (0)
  • Repair Aluminum Utility boat - Rick 21:37:49 12/29/05 (1)
  • 16' LONESTAR - Sean Summers 17:14:46 12/29/05 (1)
  • leaking rivet repair - Jim Augustine 16:35:24 12/29/05 (1)
  • chrysler cuddy cabin 1970 - patrice 10:10:12 12/28/05 (2)
  • What is the difference... - James Spicer 19:19:36 12/27/05 (5)
  • What is the difference... - James Spicer 19:19:03 12/27/05 (0)
  • seat removal - Travis 14:25:30 12/27/05 (3)
  • Bow railing - Roger 10:12:59 12/27/05 (5)
  • repair crack in canoe - Josh W. 23:35:51 12/26/05 (0)
  • repair crack in canoe - Josh W. 23:35:27 12/26/05 (0)
  • aluminum express cruisers for saltwater use? - BillR 03:58:53 12/26/05 (8)
  • transom repair for 88 basstracker - joe herndon 20:47:14 12/25/05 (3)
  • Greetings - Frogman 11:52:50 12/24/05 (4)
  • smokercraft - Jon 22:24:38 12/22/05 (4)
  • diamond plated aluminum floor - gail 17:42:49 12/22/05 (9)
  • Starcraft Marine - Loren Williams 20:04:44 12/21/05 (3)
  • Closed Cell Foam - DGDLNM 21:30:34 12/20/05 (5)
  • Life span of an aluminum boat? - Chris 17:08:27 12/20/05 (7)
  • floatation Pods - TrapperP' 08:31:41 12/19/05 (1)
  • 18' SportsKraft cabin cruiser - Tabascostan 21:40:49 12/18/05 (5)
  • Aluminum Boat Rivets - Darryl Lawson 02:17:06 12/18/05 (1)
  • 10 or 12 foot jon? - david campione 15:58:21 12/15/05 (1)
  • 19 foot Aluminum Spectrum leaking-advice - Larry 17:37:05 12/14/05 (2)
  • best place to sell bass boats - steve lee 05:50:53 12/14/05 (0)
  • best place to sell bass boats - steve lee 05:50:30 12/14/05 (0)
  • 1st boat, needs minor repairs - Steve 12:58:11 12/13/05 (6)
  • chrysler lonestar - Dale Gomez 21:57:34 12/12/05 (1)
  • Boat painting techniquies - James Spicer 16:39:33 12/11/05 (1)
  • Rebuilding my Chieftain - Greg 08:31:45 12/11/05 (2)
  • Wiring a motor and the rest of the electronics - madtank 20:07:10 12/10/05 (4)
  • starcraft 16 ft. mariner 1988 aluminum - t man 10:56:25 12/10/05 (1)
  • Flotation for Jon Boat - 14 ft tracker topper - Kentucky_Angler 15:15:11 12/09/05 (1)
  • Embarking on boat project - 2manyboats 14:45:39 12/08/05 (3)
  • Multiple questions on a Starcraft... - James Spicer 08:06:14 12/08/05 (13)
  • flotation pods - marshall 15:44:29 12/07/05 (2)
  • Aluminum Filler - JDoerr 16:30:28 12/06/05 (1)
  • Aluminum Filler - JDoerr 16:30:13 12/06/05 (4)
  • Jon Boat stability - Ken 10:28:14 12/06/05 (4)
  • Bass boat front trolling motor deck - rkorsen@aol.com 08:12:16 12/05/05 (1)
  • Fresh vs Salt Leaks??? and gluvit application - Howard Crawford 21:43:35 12/03/05 (3)
  • GM 5200 adhesive/sealant - David 22:08:57 12/02/05 (9)
  • paint stripping - james mc donald 14:19:46 12/02/05 (0)
  • boat painting - Rob 12:51:43 12/02/05 (2)
  • lone star - james 09:57:42 12/02/05 (2)
  • lone star - james 09:57:01 12/02/05 (0)
  • AlumaCraft Parts - Robert Jones 16:26:37 12/01/05 (0)
  • cables - Andy 14:42:49 12/01/05 (1)
  • I’m tearing into my Lund… Questions… - Ed s 11:28:28 11/29/05 (3)
  • Pontoon repair - Sid Draper 10:18:28 11/29/05 (2)
  • large holes in 14' aluminum v hull john boat - Thomas j 22:01:33 11/28/05 (2)
  • replacing a deck on a fiberglass boat - don 19:51:30 11/28/05 (2)
  • Rexcraft Alum Boats - Ralph Grant 16:06:16 11/28/05 (4)
  • Crestliner hull warranty - Pike Hunter 11:22:31 11/28/05 (3)
  • Help I tore apart my boat and cannot put it back together. - Jeff Hartman 07:05:07 11/28/05 (3)
  • Starcraft steeri ng - madtank 20:29:57 11/27/05 (3)
  • crestliner 1850 fishhawk 2002 - rob 17:54:15 11/27/05 (2)
  • Trying to ID antique aluminium boat - phoenixcroatia 08:42:45 11/27/05 (0)
  • Trying to ID antique aluminium boat - phoenixcroatia 08:42:08 11/27/05 (3)
  • wher is everybody???? - bob 20:34:09 11/26/05 (2)
  • Starcraft Chieftain advise and opinions wanted - David Parker 09:15:45 11/24/05 (1)
  • Replacing Floor Sections on '86 Lund Predator - Tom 14:32:06 11/23/05 (8)
  • Final answer - Duck Hunter 18:23:27 11/22/05 (4)
  • Trailer hubs?? - Loren Williams 19:44:49 11/21/05 (2)
  • Continuous hatch hinges - Mark 18:42:20 11/21/05 (5)
  • Aluminum dents & gouges - Abes 18:27:08 11/21/05 (1)
  • 1968 Lonestar - Craig Baca 15:55:00 11/21/05 (2)
  • 1958 Lone Star "Skipper" - Sam 20:52:54 11/20/05 (1)
  • Trailer for Mirro-craft 14ft - joe 11:52:10 11/20/05 (1)
  • Need drain plug for 1962 valco - Donny Martorello 21:35:35 11/19/05 (0)
  • Need drain plug for 1962 valco - Donny Martorello 21:34:42 11/19/05 (0)
  • Battery Acid - Bill 20:12:19 11/19/05 (1)
  • Multiple Leaks! - Loki 21:25:12 11/18/05 (2)
  • center pad inverted - Ervin 09:15:10 11/18/05 (2)
  • center seam - Richard Witulski Sr 06:42:03 11/18/05 (3)
  • Electrical - Charlene 21:15:38 11/17/05 (4)
  • Need Tow Ring for 16' Sea Nymph - Mike 18:49:04 11/17/05 (1)
  • Need Tow Ring for 16' Sea Nymph - Mike 18:48:30 11/17/05 (0)
  • Transom Pad - Robert G. 16:39:42 11/17/05 (0)
  • Herculiner? Pros and Cons! - Loki 16:09:05 11/17/05 (1)
  • Drain plug hole too big - brent 13:56:17 11/17/05 (2)
  • small crack in bottom of boat - jeff 08:42:51 11/17/05 (0)
  • missing rivet - Bob B. 08:36:21 11/16/05 (0)
  • missing rivet - Bob B. 08:35:41 11/16/05 (1)
  • 1992 Lund Tyee II - jamie benedickt 20:06:00 11/15/05 (1)
  • Paint one coat or two? - Big Tex 08:14:07 11/14/05 (3)
  • aluminum boat leaking.... - Mike 12:49:19 11/13/05 (8)
  • 1991 SPECTRUM BLUEFIN - mark morgan 01:38:27 11/13/05 (2)
  • thanks Spike - josh 20:05:36 11/12/05 (0)
  • how good are lowe jon boats? - josh 18:07:02 11/12/05 (4)
  • canoe transom repair - curt 17:37:19 11/12/05 (3)
  • canoe transom repair - curt 17:36:57 11/12/05 (0)
  • canoe transom repair - curt 17:36:48 11/12/05 (0)
  • canoe transom repair - curt 17:36:23 11/12/05 (0)
  • New Floor? - Loki 15:29:33 11/12/05 (1)
  • How good is a 12 foot jon boat in the bay? - Josh Demers 14:48:25 11/12/05 (0)
  • How good is a 12 foot jon boat in the bay? - Josh Demers 14:48:14 11/12/05 (3)
  • board search function - david ziegler 12:27:22 11/12/05 (3)
  • Older Starcraft? - CJ 08:36:53 11/12/05 (3)
  • Sea Nymph repair shop - GL Petersen 00:35:01 11/12/05 (0)
  • Crestliner aluminun boat floor drain plug - LaVerne Hrdlicka 15:51:02 11/11/05 (1)
  • Duracraft Transom Repair - bill k 14:03:10 11/11/05 (3)
  • Boat Seat Box - Joe 07:16:58 11/11/05 (1)
  • Flooring/Decking kits for Starcraft boats - Norman G. Schulze 05:50:03 11/11/05 (2)
  • Grumman 4.6 bass boat info - Chip 17:27:25 11/10/05 (0)
  • Looking for older Starcraft 18 Mariner - Jim 07:20:12 11/10/05 (0)
  • boat leak repair - gary 08:41:32 11/09/05 (3)
  • just a couple more ? - Jon Stueve 00:45:04 11/09/05 (1)
  • What did I do Wrong??? - Jim 15:28:45 11/08/05 (1)
  • What did I do Wrong??? - Jim 15:28:26 11/08/05 (1)
  • Replaceing ply seats - Albert Geurin 01:59:09 11/08/05 (3)
  • How to: Floor in a 16ft deep V w/ bench seats???? - Justin 18:52:48 11/07/05 (3)
  • Aluminum Mast Repair for Sailboat - Peter 12:09:40 11/07/05 (1)
  • Boat knowledge - madtank 18:37:52 11/06/05 (1)
  • 1965 Klamath trailer boat transom - Mark 15:53:22 11/06/05 (2)
  • Starcraft Aluminum Boat Paint - Ken Dykstra 11:14:27 11/06/05 (2)
  • sears jon boat leaking "how to replace rivets" - jim 09:53:06 11/06/05 (1)
  • flooring - Jon Stueve 00:54:49 11/06/05 (5)
  • Etching - Albert Geurin 21:49:19 11/05/05 (3)
  • Steering Cable - David C. 18:01:34 11/05/05 (1)
  • boat - john madrigal 14:16:33 11/05/05 (0)
  • 9.5 evinrude parts - wayne 13:18:12 11/05/05 (0)
  • extending casting deck - Trent in BG 10:03:24 11/05/05 (3)
  • silicone - Jon Stueve 00:32:48 11/05/05 (3)
  • silicone - Jon Stueve 00:32:29 11/05/05 (0)
  • weight - Tamar 21:24:45 11/04/05 (3)
  • Attn: Rick, Rick, and Ed F.....Clarkcraft epoxy - Ken Dykstra 09:44:11 11/04/05 (1)
  • 1985 lone star center console - art 00:26:41 11/04/05 (1)
  • need creative hull repair suggestions - David Ziegler 10:37:53 11/03/05 (5)
  • Painting aluminum - George Allard 18:04:21 11/02/05 (3)
  • another transom repair question (sealer) - David Ziegler 16:39:20 11/02/05 (2)
  • jonboat transom repair (metal compatibility?) - David Ziegler 16:33:22 11/02/05 (11)
  • Repair of Wards Aluminum Jonboat - Richard 20:01:44 11/01/05 (0)
  • Repair of Wards Aluminum Jonboat - Richard 20:01:29 11/01/05 (1)
  • Bullet holes in 12' Aluminum boat - Garrett 18:44:12 11/01/05 (2)
  • Bullet holes in 12' Aluminum boat - Garrett 18:43:25 11/01/05 (0)
  • aluminum fasteners sourcing - david ziegler 11:15:04 11/01/05 (6)
  • Sealing Floatation Foam??? - Terry Olson 15:25:30 10/31/05 (3)
  • Texas maid transom - Jake Rollans 11:40:57 10/31/05 (1)
  • Texas maid transom - Jake Rollans 11:40:55 10/31/05 (0)
  • Texas maid transom - Jake Rollans 11:40:35 10/31/05 (0)
  • What is a good size motor& price? - madtank 19:41:45 10/30/05 (3)
  • Need lots of help!! - Albert Geurin 00:25:40 10/29/05 (1)
  • '63tarcraft pullet steering control? - madtank 21:06:31 10/28/05 (3)
  • Boat pinting question - Tamar 20:05:30 10/28/05 (0)
  • Boat pinting question - Tamar 20:05:11 10/28/05 (0)
  • Boat pinting question - Tamar 20:04:16 10/28/05 (1)
  • Soldering aluminum, will it work? - Big Tex 10:43:26 10/28/05 (2)
  • What's a good caulk and epoxy paint for sealing an aluminum Boat - joe 00:04:46 10/28/05 (1)
  • trying to find parts for a 12ft aqua swan - ted 08:20:22 10/27/05 (0)
  • Remove the Starcraft Logo on 1965 how - Michael 03:06:33 10/27/05 (2)
  • Bed liner on alum. boat - JohnM 14:51:58 10/26/05 (3)
  • leak in the boat - Ed 12:25:33 10/26/05 (3)
  • Glub it?? - Bunky (MI) 09:26:56 10/26/05 (3)
  • Patching drill holes - Pat 16:28:05 10/25/05 (6)
  • Part for 1990(?) Fisher - Bob 10:54:32 10/25/05 (0)
  • cleaning aluminium hull - ar 05:53:39 10/25/05 (6)
  • Spike: 69' Starcraft utility planing problem - Greg 14:01:55 10/24/05 (4)
  • Has anyone tried HTS-2000? - Borders 19:18:51 10/23/05 (5)
  • Gouge repair - Bunky (MI) 18:57:16 10/22/05 (3)
  • attaching plywood to aluminum seats - captbobwoods 13:44:19 10/22/05 (2)
  • Rivet Removal - lumiecraft 12:46:13 10/22/05 (10)
  • Starcraft Holiday 18 foot - Randy 22:47:35 10/20/05 (4)
  • Electrolyses - Walt 15:01:50 10/19/05 (2)
  • How to clean water scum/line... - rpendergraft 11:27:41 10/19/05 (3)
  • In search of a 4' x 6' square AL jon boat - GA 11:25:31 10/19/05 (0)
  • 1973 Starcraft Islander I/O - Eric Draven 20:14:55 10/18/05 (0)
  • BOAT TRAILER LIGHT PROBLEM: - Michael 04:51:40 10/18/05 (6)
  • Jon John Boat Flatbottom Best Trailer - Computerguyhouston 18:40:29 10/17/05 (2)
  • Live well plug - Traci 08:07:32 10/17/05 (1)
  • Aluminum hull repair - Paul 18:58:55 10/16/05 (2)
  • Grumman Flyer sailboat - Al 15:26:55 10/16/05 (1)
  • electrical fuses - Michael 22:34:47 10/15/05 (2)
  • Manual-1995 Hewes Craft River Runner- - Will 09:30:35 10/15/05 (0)
  • Manual-1995 Hewes Craft River Runner- - Will 09:29:07 10/15/05 (0)
  • How do I build a live well ? - Michael 08:34:46 10/15/05 (7)
  • lonestar aluminum boat - thersa Kuhnlein 12:02:15 10/14/05 (4)
  • Parts - M A Norton 12:38:10 10/13/05 (3)
  • Pontoon transducer mount - Mike 09:46:10 10/13/05 (1)
  • how to fix boat horn 1995 javelin 377 - ryan 21:39:49 10/12/05 (1)
  • 1999 smoker craft hull rivets leak - butso 19:34:15 10/12/05 (2)
  • Paint Removal? - Bunky (MI) 18:12:17 10/12/05 (3)
  • Preserving new wood in an old Starcraft - Ken Dykstra 17:54:47 10/12/05 (9)
  • Montgomery Ward Aluminum Boats - T 12:57:53 10/12/05 (3)
  • Floatation foam - robert 12:12:20 10/12/05 (4)
  • Another leaky rivet question - Rick 11:40:06 10/12/05 (1)
  • Lund 1998 Tyee owners manual - Brian Fischer 11:19:05 10/12/05 (0)
  • Creased hull - Randy 08:52:42 10/12/05 (2)
  • Wagemaker Aluminum? - Bunky (MI) 07:13:13 10/12/05 (1)
  • Wagemaker Aluminum? - Bunky (MI) 07:12:08 10/12/05 (0)
  • 1996 bass tracker stress cracks - keith scogin 00:58:05 10/12/05 (2)
  • 17ft bluefin sportsman worth - Ed 18:41:59 10/11/05 (1)
  • 56 Lonestar - Jeff 13:32:25 10/11/05 (2)
  • elastomeric roof coating - Eric 09:11:26 10/11/05 (0)
  • elastomeric roof coating - Eric 09:11:20 10/11/05 (5)
  • Removing and replacing Carpet on aluminum - Borders 22:05:26 10/10/05 (0)
  • Hole near drain plug - Patrick 16:39:02 10/10/05 (2)
  • Repairing aluminum pontoons - Wade Lewis 09:19:01 10/10/05 (3)
  • King Craft Aluminum Houseboat - Ronnie Scott 18:37:47 10/09/05 (0)
  • Aluminum hatches - Frank 18:21:39 10/09/05 (1)
  • HELP IN CUSTOMIZING AND STANDARD ALUM BOAT - Ruben 19:56:55 10/08/05 (3)
  • Bottom Paint alum pontoon boat - Pwhelan 17:14:17 10/08/05 (0)
  • Late 70' Starcraft hull integrity - Dan 08:05:40 10/08/05 (2)
  • Need a bow trolling motor "lift " - Rowland Parks 18:50:29 10/07/05 (4)
  • transom repair - Gregg 06:17:44 10/07/05 (6)
  • transom repair - Gregg 06:17:07 10/07/05 (0)
  • Big Tex - Mike 13:02:22 10/05/05 (4)
  • Fiberglass type stuff covering the bottom of my aluminum boat - Big Tex 08:29:44 10/05/05 (4)
  • leaking hull 1990 Bass tracker - Michael France 08:15:39 10/05/05 (13)
  • Lower Unit - Should I have it checked? - Rick 21:29:00 10/04/05 (1)
  • Mounting to ribs -- Mike J. - Joe 15:57:27 10/04/05 (2)
  • mounting a transducer - Andy 14:26:57 10/04/05 (3)
  • mounting a transducer - Andy 14:26:52 10/04/05 (1)
  • Thru hull drain [pipe - scott 12:03:34 10/03/05 (0)
  • Restoring aluminum finish - Tom Davidson 23:48:56 10/02/05 (1)
  • Alumacraft Bow Repair and Saltwater - T-Bone 23:47:28 10/02/05 (7)
  • 12' Laron Aluminum V-Boat - Tom E. 14:34:45 10/02/05 (1)
  • 12' Laron Aluminum V-Boat - Tom E. 14:34:29 10/02/05 (0)
  • how do I Locate the bilge pump on my boat ? - BILL 20:58:31 09/29/05 (2)
  • 1965 15' STARCRAFT-JET ...Information needed on - Michael 01:55:34 09/29/05 (0)
  • creased hull - Randy 10:26:58 09/28/05 (7)
  • Preping to painting 15' aluminum jon boat. CHEAP!!! - Big Tex 15:55:44 09/27/05 (3)
  • orlando clipper - jim daniel 07:50:27 09/27/05 (2)
  • LoneStar Speedboat - Very Old - Steven MacDonald 23:08:04 09/26/05 (1)
  • CUSTOMIZING BOAT INTERIORS - LOS 21:43:19 09/26/05 (1)
  • Refinish Aluminum boom - Gary Badgley 15:40:36 09/26/05 (2)
  • Refinish Aluminum boom - Gary Badgley 15:38:41 09/26/05 (1)
  • Duratech Boat What year is it - Todd 12:17:53 09/26/05 (0)
  • Mounting to ribs - Joe 07:50:33 09/26/05 (5)
  • old aluminum johnny leaking seams - Eric 21:39:30 09/25/05 (2)
  • old aluminum johnny leaking seams - Eric 21:38:52 09/25/05 (2)
  • What Year is it? - Todd Pulis 07:55:45 09/25/05 (0)
  • How many cans of Rhino Hyde or Bedliner? - Walter Neumann 12:17:52 09/24/05 (1)
  • Can anyone help identify this old rear finned boat? - Ken 19:14:19 09/23/05 (2)
  • Refinishing wood seats in 12' boat - Mike 13:01:58 09/23/05 (1)
  • Rivet size question - and how my boat survived a tornado! - T.J. Siedsma 12:03:58 09/23/05 (1)
  • Repairing inaccessable livewell plumbing leaks - Pike 23:12:47 09/22/05 (0)
  • Repairing Seam and Rivet Leaks - Pike 22:56:08 09/22/05 (3)
  • Junkyard Aluminum 12' V-haul. ANY IDEAS??? - Nick 22:53:32 09/22/05 (3)
  • Adding bow weight - chet 18:31:17 09/22/05 (2)
  • LONE STAR COMMANDER - tashasdaddy 12:12:08 09/22/05 (3)
  • 16' gamefisher ? - jlw 20:46:53 09/21/05 (1)
  • Leaky 1969 aluminum Starcraft - Gary Duncan 20:25:51 09/21/05 (2)
  • Bench seats for Aluminum boat - Scott 17:39:36 09/20/05 (2)
  • Antifouling...How to remove - Paul 14:00:53 09/20/05 (0)
  • converting to inboard tanks - canadian 09:56:36 09/20/05 (0)
  • 1960 Starcraft 15 ft restoration - Per 07:52:28 09/20/05 (3)
  • 1960 Starcraft 15 ft restoration - Per 07:52:01 09/20/05 (0)
  • ski flee boayt - Cheryl Salim 21:04:42 09/18/05 (2)
  • OLD 12' jon boat with broken ribs causing big cracks in hull - Jonathon Woods 10:47:51 08/21/05 (5)
  • 1966 crosby sea sled - ron adams 09:39:59 08/21/05 (5)
  • Wiring diagram for a tracker boat - Jimmy 17:13:08 08/20/05 (2)
  • Extra Flotation - Magnarock 13:25:05 08/20/05 (1)
  • rivits - Mike 19:25:09 08/14/05 (1)
  • powder coating - mike 07:19:05 08/14/05 (1)
  • aluminim boat( coverting to inboard lots questions please help) - sconyersj 21:45:39 08/13/05 (6)
  • Where can I purchase aluminum closed-end rivits. - ken 18:26:15 08/13/05 (1)
  • Aluminum plate on wood transom?? - rob from Manchaca, Texas 14:15:27 08/13/05 (1)
  • sealant to use? - Brian 11:03:11 08/13/05 (3)
  • man overboard. a tall tale - chris 02:48:14 08/13/05 (1)
  • rivets-vs-welded - jay 23:02:45 08/12/05 (4)
  • Aluminum Boat Seating - Dan 17:28:18 08/12/05 (0)
  • 1956 alumacraft - Melissa 15:23:00 08/12/05 (0)
  • Lemon Pledge? - Rob 14:38:28 08/12/05 (1)
  • Lemon Pledge? - Rob 14:37:48 08/12/05 (0)
  • Lonestar Transom - wilbur 11:32:02 08/12/05 (2)
  • Pedestal Seat Mounts - Joe 07:28:42 08/12/05 (4)
  • 1956 Duracraft Aluminum Runabout - Mike 13:10:59 08/11/05 (0)
  • restoration - Ross 10:22:25 08/11/05 (0)
  • Sea Nymph Sidewinder Windshield - Archie J. Rock 09:59:50 08/11/05 (0)
  • 14' Sea King with missing fins....help! - Lon 23:44:42 08/10/05 (3)
  • Sealing Aluminum Hull - Done Now - Have I forgot anything? - Martin 23:35:32 08/10/05 (2)
  • Aluminum Boat-Grounding Electrical - Martin 22:55:32 08/10/05 (3)
  • 1958 Alumacraft Queen Merrie 18' - R.J. 21:48:50 08/10/05 (0)
  • 1959 Aluma Craft Windshield - Dave 20:19:08 08/10/05 (0)
  • Paint for Lowe Boat - Larry J 17:57:30 08/10/05 (2)
  • Boat Wiring - Midman 16:45:14 08/10/05 (2)
  • Leak in bow - Robert G. 22:14:05 08/09/05 (1)
  • 1986 Bayrunner 18' motor capicity - mjb 18:09:34 08/09/05 (0)
  • Starcraft Chieftain Weight - John M. 16:57:32 08/09/05 (3)
  • 18 ft Starcraft Holiday Aluminum - Stuart Kennedy 16:10:30 08/09/05 (1)
  • 18 ft Starcraft Holiday Aluminum - Stuart Kennedy 16:06:21 08/09/05 (0)
  • Front motor mounts 1978 Chieftain 18 - Doug 15:22:54 08/09/05 (1)
  • 1967? StarCraft - Leah 12:52:42 08/09/05 (0)
  • decking a jon boat - chris 09:29:03 08/09/05 (2)
  • ESOX Rod Sponsorships Available - Spencer 23:38:30 08/08/05 (1)
  • Floatation - Andy 16:22:02 08/08/05 (1)
  • rotomolded seat boxes - jerude 23:59:34 08/06/05 (0)
  • Navigation lights - Dan 23:52:29 08/06/05 (6)
  • 14' StarCraft SeaFarer - Loren Williams 20:30:00 08/06/05 (2)
  • need a boat part - Dave Roxin 19:18:55 08/06/05 (0)
  • Grumman alum. keel repair - Big Mitch 19:01:20 08/06/05 (4)
  • 1976 starcraft supersport 16' taking on water in motor mount area - Eric 12:18:58 08/06/05 (1)
  • AlumaCraft Dominator Wiring Schematic - Rhonda 20:49:26 08/05/05 (0)
  • removeing benches from lund boats - Jeremy Lindemann 16:07:27 08/05/05 (6)
  • Floatation - Andy 15:47:14 08/05/05 (0)
  • 16' aluminum restoration - Ryan 11:56:03 07/27/05 (2)
  • stripping old paint - bob johnson 02:59:08 07/27/05 (3)
  • Boat Show Experience? - bob 22:55:16 07/26/05 (2)
  • Leak repair - Shane 16:29:16 07/26/05 (4)
  • Thanks !!!! - Ed Lankford 19:54:30 07/25/05 (0)
  • 14 mirrocraft deep fisherman - bill 15:30:25 07/25/05 (2)
  • 3m marine sealent 4200 - chris 13:24:47 07/25/05 (7)
  • Interior painting - Andy 12:35:18 07/25/05 (0)
  • pulling a tube? - robert 10:00:15 07/25/05 (5)
  • 67' Starcraft 14' Aluminum Fishing Boat Parts - Dave H 20:28:07 07/24/05 (0)
  • repairing a scratch/gouge in an aluminum boat - kirk juffer 18:31:11 07/24/05 (0)
  • 8' Alum. Montgomery Wards Sea King History & Repair? - Chris Esch 15:43:45 07/24/05 (1)
  • Bad Transem??? - Ratdogs 07:37:14 07/24/05 (4)
  • Boating Links and Blogs - Heartland Boater 06:12:34 07/23/05 (0)
  • starcraft holiday 18 & trailering - peter 16:55:11 07/22/05 (3)
  • eyelets - Hank Wall 13:50:02 07/22/05 (2)
  • eyelets - Hank Wall 13:49:32 07/22/05 (0)
  • Motor Startup ??? - JJ 12:02:28 07/22/05 (1)
  • rotten wood transon on 12 ft SeaKing - Chris Drake 09:55:44 07/22/05 (2)
  • 1958 Texas Maid - Brad Smith 19:47:40 07/21/05 (2)
  • 72' starcraft deep V with Torn aluminum hull - Joe 19:35:10 07/21/05 (2)
  • Damn, Painting problem-Creative solution needed - bob 11:51:34 07/20/05 (7)
  • 1957 FEATHERCRAFT VAGABOND? - SUE 11:01:43 07/20/05 (3)
  • Starcraft Jet Capacity - Rick 06:04:04 07/20/05 (5)
  • breaker switch wiring for 1976 starcraft supersport - jay 19:00:51 07/19/05 (0)
  • 12 foot v-hull vin # - chris 16:07:41 07/19/05 (0)
  • Skin repair or part for 1998 Grumman 20' Pontoon Boat - Alan Cushman 08:05:51 07/19/05 (1)
  • Re: Maximum size outboard for a 12' Starcraft aluminum boat. - Bob 05:40:42 07/19/05 (2)
  • aluminum kayak - josh laraby 21:43:49 07/18/05 (0)
  • unstable while standing - Mel S. 16:03:11 07/18/05 (4)
  • How Much Is My Boat Worth ??? - JJ 14:36:13 07/18/05 (4)
  • I Need An Aluminum Rib - David M. 12:08:06 07/18/05 (3)
  • Spectrum 1500 Aluminum Boat Information on Company - Tom 06:56:45 07/18/05 (2)
  • 1960 DuraCraft Aluminum Boat with Fins? - P.McCartney 05:40:02 07/18/05 (3)
  • Replacing transom on 12' Aluminum Starcraft - Mike K. 13:50:26 07/17/05 (4)
  • Maximum size outboard for a 12' Starcraft aluminum boat. - Mike K. 10:37:52 07/17/05 (8)
  • best option for pinhole leak question - bob 09:33:02 07/17/05 (4)
  • drain plug for my 14' Richline - jack watson 08:09:17 07/17/05 (7)
  • Wards Sea king Aluminuim rivoted boat - Janet Ashcraft 22:03:33 07/16/05 (3)
  • 1959 Alumacraft Deep C fishing boat opinions wanted - John Pancoast 16:41:23 07/16/05 (2)
  • 14' Alum. boat - Lois 20:32:14 07/15/05 (1)
  • GOOP worked well for hairline crack leak - Peter I 13:34:14 07/15/05 (0)
  • Terminal Fuse Block Wiring - Dennis 11:50:53 07/15/05 (2)
  • wiring problem 92 tracker pontoon - pat 10:36:11 07/15/05 (1)
  • 1992 24 ft sun tracker - pat dell 09:35:02 07/15/05 (0)
  • Valco transom boat handle - Ken 20:22:13 07/14/05 (0)
  • Aluminium Boat Repair - Tony 16:43:56 07/14/05 (4)
  • best 12' jon boat maker - Tim 16:16:21 07/14/05 (2)
  • Reducing transom height - Brett 12:46:13 07/14/05 (6)
  • Reducing transom height - Brett 12:46:06 07/14/05 (0)
  • i know this is for aluminum but please adv for fiburglass - brad 09:56:18 07/14/05 (0)
  • carpeting front casting deck - Trent in BG KY 19:31:34 07/13/05 (2)
  • carpeting front casting deck - Trent in BG KY 19:31:24 07/13/05 (2)
  • 10 ft. sea nymph - Joe L 07:22:12 07/13/05 (0)
  • Duratech Boats - Dakota 05:45:16 07/13/05 (1)
  • I was hoping to get some help... - James S. 05:39:49 07/13/05 (2)
  • preping haul for a paint - rob 18:55:02 07/12/05 (3)
  • LIVEWELL PUMP - BRIAN 09:32:23 07/12/05 (1)
  • '72 starcraft needs left rear alum. corner - gerrit 07:28:27 07/12/05 (1)
  • looking for a 1987 Evinrude 9.5 hp Manual - Gene 06:30:04 07/12/05 (0)
  • looking for a 1987 Evinrude 9.5 hp Manual - Gene 06:29:38 07/12/05 (0)
  • looking for a 1987 Evinrude 9.5 hp Manual - Gene 06:28:53 07/12/05 (1)
  • replacing plywood floor in 17' alum.fish and ski - Mike 20:53:41 07/11/05 (1)
  • 1986 16ft Alumacraft livewell upmp - rocky 19:07:27 07/11/05 (0)
  • Aluminum Cleaning - Bruce Johnston 18:39:38 07/11/05 (5)
  • Should I boat take on any water? - Mo Khan 10:00:37 07/11/05 (0)
  • Jon Boat Handle - Elton 07:41:36 07/11/05 (1)
  • Re: opinions needed for jon boat console steering - mitchell 06:07:06 07/11/05 (0)
  • opinions needed for jon boat console steering - bob 13:36:12 07/10/05 (3)
  • opinions needed for jon boat console steering - bob 13:35:12 07/10/05 (0)
  • 1966 Starcraft 14' Alum - needs new floor and carpet - James S. 10:09:50 07/10/05 (1)
  • 1966 Starcraft 14' Alum - needs new floor and carpet - James S. 10:09:07 07/10/05 (0)
  • Dennis!! - phill 08:54:29 07/10/05 (0)
  • Manual for a 1966 Lund 14ft - Stephen Johnson 21:51:31 07/09/05 (0)
  • Manual for a 1966 Lund 14ft - Stephen Johnson 21:50:42 07/09/05 (0)
  • Aluminum Boat small oxidation holes - Larry 14:09:46 07/09/05 (1)
  • Boat Paint Report - fishinnut 21:27:04 07/08/05 (2)
  • leak - patrick adams 12:29:02 07/08/05 (1)
  • angle alum keel strips - Dennis 12:21:59 07/08/05 (5)
  • 18' -20' conversion idea... - Bow 19:30:10 07/07/05 (2)
  • Anchor placement on pontoon boat. - Dave 18:08:05 07/07/05 (1)
  • Boat Carpet - Mike 17:03:18 07/07/05 (2)
  • rocky creek is getting low... - Dex 16:06:53 07/07/05 (3)
  • no way to drain water from my boat - Tim 13:04:57 07/07/05 (4)
  • no way to drain water from my boat - Tim 13:03:58 07/07/05 (0)
  • replacement windshield 221 Starcraft Islander - steve eichler 03:56:09 07/07/05 (0)
  • sealing holes in transom left from previous motor - Russ 20:14:58 07/06/05 (1)
  • Lowe 12ft jon boat transom - Fred 16:46:02 07/06/05 (1)
  • Lowe 12ft jon boat transom - Fred 16:45:52 07/06/05 (1)
  • 1956 lone star transom - brian 09:49:08 07/06/05 (2)
  • Newbie question Removing homemade console - buza 20:32:15 07/05/05 (1)
  • Rino Lining an Aluminum Boat - George Jackson 18:17:36 07/05/05 (2)
  • Removing closed bow off '82 Starcraft - wit 18:07:33 07/05/05 (1)
  • aluminum boat rivets - Fred 16:36:41 07/05/05 (1)
  • Boat trailer hubs - Dan Broek 11:02:38 07/05/05 (0)
  • hydrofoils - Trent 20:48:29 07/04/05 (6)
  • What can I use to sand aluminum boat - Donny 19:57:52 07/04/05 (3)
  • Stress Cracks - John 12:19:07 07/04/05 (5)
  • bilge pump install - dave 06:52:49 07/04/05 (2)
  • I need pictures of a Lonestar Aluminum boat 50's or 60's? - Charles Gardner 17:36:08 07/03/05 (2)
  • 1963 Starcraft - Mark 14:53:34 07/03/05 (2)
  • Starcraft 15 foot - Paul 15:04:07 07/02/05 (1)
  • How do I take a dent out of a pontoon??? - Sharman 21:35:47 07/01/05 (1)
  • Whale tail for 1652 SeaArk - Trent 20:34:06 07/01/05 (3)
  • dura fix - mitch 13:52:22 07/01/05 (1)
  • speedometer/ rpm problems - kyle timme 09:26:22 07/01/05 (1)
  • speedometer/ rpm problems - kyle timme 09:25:45 07/01/05 (0)
  • Cap. Rob - Adam Outen 08:42:37 06/30/05 (0)
  • what type wood should I use? - Pete 05:15:38 06/30/05 (2)
  • Bimini top for 16' - Dave B. 21:01:24 06/29/05 (1)
  • aluminum antifouling in warm,salt water - Dennis Gray 19:59:33 06/29/05 (0)
  • River boat hull protection/coating ? - Dave Reier 05:06:49 06/29/05 (3)
  • Aluminum Paint - Mike 18:11:31 06/28/05 (0)
  • alumacraft 1436 0.62 thickness - Duane 12:34:34 06/28/05 (2)
  • Ship Master control box - Pete 09:09:30 06/28/05 (2)
  • Starcraft PLUG - TTBY44 06:06:49 06/28/05 (1)
  • Reinforcing transom on a Starcraft Holiday O\B - Paul 22:13:44 06/27/05 (3)
  • 12 ft montgomery ward...cracked corner brackets - kyle 22:04:43 06/27/05 (0)
  • no hin how do i get one all i have is the modle and serial - Tim 19:51:24 06/27/05 (2)
  • building a windshield from scratch - Russ 19:04:22 06/27/05 (6)
  • 24ft lone star cabin cruiser - Adam Outen 16:09:17 06/27/05 (6)
  • How to find leaks in an 18 ft 1970 Starcraft - pete 12:26:48 06/27/05 (0)
  • 1959 17' Crestliner leaking, taking on water like crazy - Mo Khan 11:25:55 06/27/05 (5)
  • need a clean boat - jackie 19:49:45 06/26/05 (2)
  • 14' Starcraft - Pete 18:49:19 06/26/05 (4)
  • Evinrude 9.9 outboard - Jim 09:54:14 06/26/05 (1)
  • Aluminum boat leak help... - Mike M. 07:12:46 06/26/05 (2)
  • useful site - Peter 07:10:13 06/26/05 (0)
  • hole in hull, on Grumman Aluminum canoe - deb 18:34:38 06/25/05 (1)
  • Alumacraft 1436 LT hull cracking - Duane 13:23:20 06/25/05 (1)
  • Alumacraft 1436 LT hull cracking - Duane 13:23:08 06/25/05 (0)
  • How do I find leaks in 1978 StartCraft Aluminum 18ft - peter orloff 10:02:25 06/24/05 (3)
  • Starcraft 14ft - TTBY44 05:49:48 06/24/05 (2)
  • proper boat to trailer fit - Keith 05:44:42 06/24/05 (2)
  • Boat motor putting charge in battery - Dave 19:20:49 06/23/05 (1)
  • Real capacity of V HULL - KIKOO 14:14:36 06/23/05 (1)
  • 1968? Richline, 14 ft. deep V? used to have covered bow - say_der 12:27:30 06/23/05 (1)
  • 91 Landau 21 in transom - John 19:35:00 06/22/05 (0)
  • Plexiglass windshield grommet - Don McC 16:50:26 06/22/05 (0)
  • Painting my John Boat like a Bass Pro bass boat - Andy 14:08:18 06/22/05 (0)
  • 1966 Crysler Cruiseliner 111-24ft. - Capt. Rob 13:34:32 06/22/05 (1)
  • 1966 Crysler Cruiseliner 111-24ft. - Capt. Rob 13:33:54 06/22/05 (0)
  • Epoxy garage floor coating - smashimus 11:54:53 06/22/05 (4)
  • Broken nose cap - Scott 10:58:18 06/22/05 (4)
  • Gluvit vs. Goop vs. whatever - Peter I 10:46:47 06/22/05 (2)
  • aluminum boat repaint - paul 09:27:53 06/22/05 (1)
  • Need advice for fixing cracked ribs and hull - Ian 08:08:03 06/22/05 (7)
  • 1977 Starcraft 14 ft semi-V aluminum boat- need capacity plate info - Nathan 21:05:12 06/21/05 (4)
  • Repainting my Aluminum Jon Boat - Andy 15:54:19 06/21/05 (1)
  • rear deck lid - Trent 15:13:36 06/21/05 (5)
  • Wards Sea King 12' Weight Capacity - Bill Brennum 14:17:15 06/21/05 (1)
  • Wards Sea King 12' Weight Capacity - Bill Brennum 14:17:05 06/21/05 (1)
  • cornor caps for lowe 17 fishing boat - John newcomer 12:42:50 06/21/05 (1)
  • transom extender - say_der 12:21:14 06/21/05 (1)
  • looking for info. on 1966 crosby sled 15 ft 0r 16ft model - walt 08:02:30 06/21/05 (1)
  • Sealing through- hull accessories - Doug 06:15:56 06/21/05 (1)
  • Trailer lights - Peter 05:46:18 06/21/05 (5)
  • Starcraft name plate - Alan Nordby 20:03:00 06/20/05 (0)
  • Old Boat Refinishing-Paint Removal - Andy 15:44:17 06/20/05 (4)
  • Cost of aluminum canoe? - Matt 14:58:29 06/20/05 (0)
  • make of boat? - steven lux 10:32:05 06/20/05 (1)
  • make of boat? - steven lux 10:29:35 06/20/05 (0)
  • Leaking Alumacraft Bass Boat - Doug 06:56:06 06/20/05 (5)
  • cracked metal on top of board on the transom. - say_der 06:14:26 06/20/05 (1)
  • Alumin gussets/quarter knees - Mike 04:47:00 06/20/05 (0)
  • Fiberglass Boat transum repair????? - BUTCH 18:02:41 06/19/05 (1)
  • Cadillac Coronado Aluminum Boat ? - Cyndi 15:58:34 06/19/05 (2)
  • Do I really need to paint the inside of my boat? - wit 12:36:42 06/18/05 (1)
  • Boat deck - Dave Roxin 09:32:16 06/18/05 (0)
  • touch up paint for Lund - Carter Stetson 08:07:09 06/18/05 (0)
  • 16 ft. sea maid - nick blunt 01:07:26 06/18/05 (2)
  • aluminum boat rivet repair - Richard 22:43:24 06/17/05 (1)
  • guide posts - Cptdave 18:36:47 06/17/05 (1)
  • Steering cable - John 12:38:26 06/17/05 (1)
  • UV Light makes aluminum brittle ?!!! (Mike) - Steven Bryant 09:36:25 06/17/05 (8)
  • 1959 Evinrude - Don Osborn 19:48:29 06/16/05 (1)
  • weeping rivets - Tom 16:39:03 06/16/05 (1)
  • Old Boat Refinishing - Andy 13:45:44 06/16/05 (3)
  • Lund Leaks - Wilson 11:33:31 06/16/05 (3)
  • Boat manuals - Bob 10:14:48 06/16/05 (1)
  • Re: bolts with cleats that hold boat handles though transom - den in illinois 10:08:04 06/16/05 (0)
  • Good online places to buy parts, etc - wit 08:55:31 06/16/05 (0)
  • 2004 Crestliner broken welds, cracked seams, broken rivets - Stewart 07:13:52 06/16/05 (8)
  • small hole in hull - randy pace 05:39:21 06/16/05 (4)
  • 1997 Hewescraft Searunner Gas Tanks - A Montana 11:57:33 06/15/05 (0)
  • bolts with cleats that hold boat handles though transom - den in illinois 10:21:53 06/15/05 (7)
  • 14' Aeroliner - Would like information - Smash 07:22:23 06/15/05 (3)
  • Carpeting Aluminum - Mike S 06:37:52 06/15/05 (5)
  • 1957 Lone Star Malibu Drain Plug? - Conrad 06:07:09 06/15/05 (1)
  • 1957 Lone Star Malibu Drain Plug? - Conrad 06:06:59 06/15/05 (0)
  • Fiberglassics. - Frogman 04:24:53 06/15/05 (1)
  • Steering cable - John M 19:08:28 06/14/05 (1)
  • Pic of '82 Starcraft Sprint - Wit 18:22:41 06/14/05 (1)
  • Another Flooring question. - Terry 15:30:52 06/14/05 (3)
  • Old Lund 16ft with a wrap around windshield - Andrew Krenz 08:27:04 06/14/05 (0)
  • Springbok drain plug - Gary 05:56:50 06/14/05 (1)
  • Springbok drain plug - Gary 05:56:29 06/14/05 (0)
  • opinion about storage/battery - joeb 04:24:50 06/14/05 (2)
  • Floor paint - Duane 13:50:53 06/13/05 (9)
  • Finding leaks - TrapperP 11:08:10 06/13/05 (1)
  • Lund Leaks - Dave 07:18:18 06/13/05 (4)
  • Center deck for model E - Swen Erickson 06:53:37 06/13/05 (0)
  • Gas vapors - JimL. 12:39:20 06/11/05 (2)
  • Help! I'm the wife and sick of bailing! - Rena 10:08:56 06/11/05 (7)
  • new to the boating world and need help - Tim 19:14:35 06/10/05 (1)
  • 1979 Starcraft? - Kirk 14:38:57 06/10/05 (12)
  • hull id number - Tim 14:28:23 06/10/05 (2)
  • hull id number - Tim 14:28:15 06/10/05 (0)
  • Alumacraft Canoe - 1974 Square Stern - Transom Boards - Chuck Rose 13:30:44 06/10/05 (1)
  • Boaters Insurance - Pmarollo 05:38:39 06/10/05 (2)
  • 1981 Bass tracker questions - Donal 00:05:44 06/10/05 (3)
  • Restoring a Richline aluminum boat - Dani Johnson 16:24:21 06/09/05 (0)
  • Plug in pole/running lights? - Don 10:25:39 06/09/05 (8)
  • HOW TO SEARCH????? - Don 10:06:06 06/09/05 (3)
  • Location of hull ID # - Steve 10:05:56 06/09/05 (2)
  • HOW TO SEARCH THIS BOARD? - CHARLES 06:02:14 06/09/05 (3)
  • skeg repair - rick 00:36:27 06/09/05 (2)
  • How do I find year model? - Skip 14:18:30 06/08/05 (2)
  • wiring questions - Relic's shack 07:42:03 06/08/05 (5)
  • livewell - Tim 06:18:22 06/08/05 (1)
  • 1957 Feathercraft clipper - Eric Hughes 18:15:05 06/07/05 (2)
  • boaters world .com - joeb 16:12:46 06/07/05 (1)
  • Crack in aluminum stringer...repair options? - Brad 12:18:21 06/07/05 (3)
  • Center Seam Leaking - Mike 09:43:25 06/06/05 (3)
  • need parts starcraft mariner - george Laws 07:27:34 06/06/05 (0)
  • Panel gauges not working - juice 07:08:16 06/06/05 (2)
  • Lund Alaskan Damaged in Traffic Accident - Bill Cook 19:45:19 06/05/05 (3)
  • Naval Architecture Software, - tel 06:27:38 06/05/05 (1)
  • tiny leaks - Tim Sutton 23:47:05 06/04/05 (2)
  • storage under middle seat - joe b 21:52:46 06/04/05 (1)
  • aluminum boat hull repair - David Kordack 09:15:49 06/04/05 (2)
  • Potential Hazard.... - Mike 07:21:34 06/04/05 (0)
  • Convert V-Hull into bassboat - kris 03:29:03 06/04/05 (16)
  • Experiance with spar varnish on flooring? - Brad 13:04:36 06/03/05 (7)
  • adding a steering stand - mel 12:04:33 06/03/05 (2)
  • Removing Bench Seats - Sawcat 08:55:31 06/03/05 (1)
  • Flounder Lights!! - Phill 04:13:31 06/03/05 (2)
  • bench seats - mitch 16:38:11 06/02/05 (1)
  • ED WITH MOONSHINE 21' STARCRAFT RESTO PROJECT - ART BERUBE 14:50:26 06/02/05 (1)
  • Pounding Rivits? - Drew 09:52:09 06/02/05 (7)
  • Pounding Rivits? - Drew 09:52:01 06/02/05 (0)
  • Horsepower rating for boats? - Brad 08:33:22 06/02/05 (6)
  • Rotten Transom - Jackson Knight 06:07:14 06/02/05 (5)
  • 1965 Naden 14ft aluminum boat - Emile 21:38:14 06/01/05 (0)
  • Aluminum boat rivet replacement and decking - Ted 17:54:16 06/01/05 (2)
  • Coast Guard publication - Ken A 15:01:46 06/01/05 (0)
  • Cedar for use as boat flooring? - Brad 13:13:23 06/01/05 (2)
  • Spike.......Evinrude Serial # - Charlotte 07:40:02 06/01/05 (1)
  • top aluminum boats and what I may expect to pay - william armstrong 19:39:24 05/31/05 (9)
  • boats - Neil 19:17:52 05/31/05 (1)
  • Grumman Boat HP Capacity - Mike M. 18:08:20 05/31/05 (4)
  • Motor throughing water - Dave 17:58:54 05/31/05 (2)
  • Boat Flooring and Deck - Claude 17:31:52 05/31/05 (4)
  • Weight Limit - Lisa 12:04:25 05/31/05 (1)
  • Aluminum Boat Hull Repair - holes - Dan 09:50:48 05/31/05 (1)
  • Spike..Man of Knowledge...Please assist - Charlotte 06:57:48 05/31/05 (3)
  • Crestliner ss Floor for a 200l Sportsman, How to? - Wendell Spencer 06:52:28 05/23/05 (0)
  • Dented Drain Plug Hole - Ron Murtaugh 04:39:40 05/23/05 (4)
  • Two things - Bill Smith 04:09:55 05/23/05 (7)
  • proper motor mounting - Bill P 18:58:54 05/22/05 (1)
  • Help value my '55 Lonestar 14' v-hull...flawless. - Randy 12:13:50 05/22/05 (5)
  • Just got a 15Ft,Alumv-btm say Cherokee McKenzie Boat Mfg. Any info on this boat? - D. Howell 11:01:01 05/22/05 (0)
  • Bench seat help needed - Jessica 08:02:00 05/22/05 (4)
  • repairing a crack - mitch faust 13:36:37 05/21/05 (6)
  • 14' boat speed - davejnz 11:55:55 05/21/05 (2)
  • pulling transom wood up & out of transom - Russ 18:56:13 05/20/05 (8)
  • Welding Aluminum - John 05:51:54 05/20/05 (1)
  • Aluminum Cleaning, Polishing, etc? - Rob 17:37:59 05/19/05 (1)
  • Aluminum Cleaning, Polishing, etc? - Rob 17:35:32 05/19/05 (1)
  • Antifouling Paint need? - Seth Alder 15:32:05 05/19/05 (1)
  • 1964 Starcraft Aluminum Boat - Mike 20:46:46 05/18/05 (2)
  • Duracraft 1950's aluminum 15ft boat - Jen 15:41:10 05/18/05 (0)
  • How durable is Camo Clad? - Trevor Spradling 12:43:25 05/18/05 (0)
  • How durable is Camo Clad? - Trevor Spradling 12:42:50 05/18/05 (0)
  • 12/24 volt trolling motor wiring - Jess 05:52:00 05/18/05 (3)
  • wanting to fix a leaking aluminum hull - brent homan 20:18:00 05/17/05 (0)
  • Starting rivets - Carl 18:34:23 05/17/05 (1)
  • rivet spacing on bow curve/chine - Carl 18:30:12 05/17/05 (1)
  • Re:motor capacity '69 starcraft 15'6" - Russ 18:18:36 05/17/05 (0)
  • 16 Foot Quachita aluminum boat motor capacities - Paula 09:19:35 05/17/05 (1)
  • 1968 aluminum craft cruiser - Diann 09:02:40 05/17/05 (0)
  • Canoe Flotation Question - john 07:22:43 05/17/05 (1)
  • Canoe Flotation Question - john 07:22:31 05/17/05 (0)
  • Have hull ID # need make and model - Denis Poeppe 06:52:53 05/17/05 (1)
  • Motor Capacity on 1969 Starcraft 15' 6 - Andy 03:53:24 05/17/05 (4)
  • cheap aluminum welder - andy 02:25:03 05/17/05 (0)
  • help painting aluminum jon boat - jer 22:04:44 05/16/05 (1)
  • Paint for Lund 5.3 Tyee - Joe Johnson 21:55:27 05/16/05 (1)
  • replace or re-use old flotation foam? - Russ 18:59:22 05/16/05 (9)
  • 1983 Webb Craft - Jerry Tuhy 17:43:32 05/16/05 (0)
  • 1983 Webb Craft - Jerry Tuhy 17:43:12 05/16/05 (0)
  • Tracker hull - Linda Franklin 13:01:35 05/16/05 (2)
  • Keel Restoration - Steve 11:13:48 05/16/05 (7)
  • needing details on how to repair transom on alumacraft - TJ 10:36:49 05/16/05 (7)
  • Goop Coat-It on leaking aluminum boat hull - Sean 09:15:48 05/16/05 (2)
  • Re: Removing bench seat in a 14' boat - Shawn FitzPatrick 08:59:46 05/16/05 (0)
  • boat manufacturer - Shawn FitzPatrick 13:09:04 05/15/05 (3)
  • solid oak plywood flooring how to seal/apply - doc 19:44:41 05/14/05 (2)
  • Question where i can get - Delt4 13:25:51 05/14/05 (0)
  • Plywood sealing preference?? - Mike 17:47:58 05/13/05 (4)
  • Pontoon Dents in Aluminum - Vern 01:28:30 05/13/05 (0)
  • Scuttle hole for fore battery on Lund Rebel - Don 15:32:45 05/12/05 (2)
  • Aluminum Boat Repair and Custom Fabrication - KjnMartini 13:22:48 05/12/05 (9)
  • schematic for fuel system - ged 09:38:13 05/12/05 (1)
  • Canned Foam Flotation?? - FishTales 17:27:52 05/11/05 (7)
  • Part for sea nymph boat needed - Chad Guyette 16:38:51 05/11/05 (0)
  • Lund & Hintz duck boat - Ron 15:58:09 05/11/05 (1)
  • Tracker Rip - JDW 11:38:12 05/11/05 (2)
  • Prepping/Painting 21' Aluminum Boat - Johnny 15:01:45 05/10/05 (1)
  • Boat Oars - Doug Uhlmann 11:57:06 05/09/05 (5)
  • 1978 sea nymph parts!!!!!! - mark 07:04:21 05/09/05 (0)
  • 14' 1960 lone star boat drain plug - Roy Neis 06:42:48 05/09/05 (1)
  • Starcraft Chieftain - John Brooking 03:49:35 05/09/05 (4)
  • 2 motors on transom - Ron 21:13:03 05/08/05 (4)
  • Lonestar Windsheild - Don Osborn 20:21:00 05/08/05 (3)
  • rivit guns - greg 19:34:36 05/08/05 (5)
  • poping rivits out ?? - grant 19:15:40 05/08/05 (6)
  • leaky 95 Tracker - yert logue 12:13:52 05/08/05 (2)
  • Poling Platform - RD 08:21:32 05/08/05 (0)
  • Removing bench seat in a 14' boat - Shawn FitzPatrick 06:22:54 05/08/05 (5)
  • Naval Architecture Software, - tel 00:20:12 05/08/05 (1)
  • Where is the hull # on a Delhi 14ft Aluminum Boat? - John McKay 18:20:04 05/07/05 (1)
  • Trailer tires - K- M 09:50:33 05/07/05 (4)
  • year of Evinrude by serial & model - Plankton 08:28:21 05/07/05 (2)
  • Re: FYI. Excellent Alternative To Using Wood - Mike 13:32:36 04/14/05 (1)
  • Re: FYI. Excellent Alternative To Using Wood - Mike 14:12:00 04/13/05 (3)
  • Fisher Marine Switch Panel - Debbie 09:21:31 04/13/05 (0)
  • Ouachita aluminum boat - Jeff Atkinson 20:59:18 04/12/05 (1)
  • Removing bench seats on jon boat - Matt 19:03:30 04/12/05 (3)
  • 21'Chieftan - Terry 12:16:17 04/12/05 (5)
  • Welding Riveted Seams??? - kevin 10:00:42 04/12/05 (1)
  • Motor Removal - brad smith 05:12:48 04/12/05 (2)
  • Rhino Lining Anyone? - Bob Reed 04:34:03 04/12/05 (6)
  • DuraCraft Aluminum - woodruff 21:12:13 04/11/05 (0)
  • polorkraft of memfis boat - Bruce Pederson 16:45:47 04/11/05 (0)
  • windshield - leon hickey 16:14:15 04/11/05 (0)
  • windshield - leon hickey 16:07:57 04/11/05 (1)
  • Vinyl/Rubber flooring source for 1976 18starcraft CC - Richard Parisen 13:40:46 04/11/05 (2)
  • 1954 Lone Star - Tim 13:36:16 04/11/05 (4)
  • Good sealer - Rbrannon 13:25:52 04/11/05 (4)
  • DENT IN ALUMINUM HULL - Robert 07:36:21 04/11/05 (4)
  • Removing carpet glue - Jim L. 19:05:34 04/09/05 (3)
  • Transom bowing - kjp1400 17:20:33 04/09/05 (4)
  • 16 ft lund - Jim from Wisconsin 13:10:24 04/09/05 (3)
  • 1966 Starcraft Boat? - Eva Kirkland 12:32:29 04/07/05 (2)
  • stripping decals - Hulka 08:08:49 04/07/05 (3)
  • painting alum boat - jim 07:51:39 04/07/05 (7)
  • need a prop - kay 04:56:38 04/07/05 (3)
  • Merc 9.9 2 cycle, Can't post to motor board, Need help - Jeff 22:56:38 04/06/05 (1)
  • Duratech boat - Nat Ellis 04:55:01 04/06/05 (0)
  • 8' aluminum boat - Tim 18:11:19 04/05/05 (0)
  • Need replacement pontoon doors - ron gill 16:27:44 04/05/05 (1)
  • Replacing carpet on Bass Tracker - Todd 08:48:08 04/05/05 (2)
  • Aluminum Canoe Bad Condition - Jarrod 21:09:27 04/04/05 (0)
  • lift boat off trailer - Canadian 19:02:44 04/04/05 (3)
  • 1995 Spectrum Dominator info search - redgotee1206 11:17:20 04/04/05 (1)
  • cracked hull - ed dodd 09:11:28 04/04/05 (2)
  • Re: Aluminum Restoration - Dave 21:01:37 04/03/05 (1)
  • what do these hold? - matt 20:18:54 04/03/05 (8)
  • Wanted - Starcraft Mariner - John 17:29:55 04/03/05 (3)
  • replacing floor concerns - jim 14:17:47 04/02/05 (8)
  • Removing Steering from Wood - Dennis 10:02:34 04/02/05 (1)
  • blue star - dustin 21:57:42 04/01/05 (2)
  • Aluminum Restoration - Eddie Williams 18:40:21 04/01/05 (0)
  • Rivets for aluminum boat. - Barry 15:16:03 04/01/05 (0)
  • Rivets for aluminum boat. - Barry 15:15:49 04/01/05 (0)
  • Draining Pontoons - Chris K 12:21:17 04/01/05 (1)
  • Tracker Boat Cover - Jason 19:11:44 03/31/05 (1)
  • Painting aluminum boat - Flgirl 17:22:30 03/31/05 (3)
  • Transom repair - Dennis 15:15:00 03/31/05 (2)
  • Swim Platform for Starcraft 170LE - Chuck Gullage 14:56:59 03/31/05 (0)
  • Do it yourself roll on bedliner - Charlie 13:14:27 03/31/05 (1)
  • Aqua Swan? - Joe 11:47:17 03/31/05 (0)
  • Aqua Swan? - Joe 11:47:02 03/31/05 (0)
  • what are these? - matt 06:18:15 03/31/05 (0)
  • About our damaged aluminum canoe - Dianna Lynn 22:48:00 03/30/05 (0)
  • How many spray cans? - griz 18:25:05 03/30/05 (3)
  • wiring - al 17:23:39 03/30/05 (2)
  • wiring - al 17:22:15 03/30/05 (0)
  • Starcraft 14 wood rail how old??? - Bob 16:53:10 03/30/05 (3)
  • Painting aluminum - Jon Close 15:33:00 03/30/05 (1)
  • 14' Startcraft conversion - Sam Gascho 06:40:39 03/30/05 (5)
  • Re: Is it just me or are there a lot of post about - Todd 05:49:20 03/30/05 (4)
  • Trouble removing controller from console - rharber 18:37:35 03/29/05 (1)
  • Fitted boat top for vintage boat - Don McC 11:09:18 03/29/05 (0)
  • will a 6 hp evinrud push my 14 ft aluminum v hull - gathney 08:52:05 03/29/05 (6)
  • Looking for Starcraft Mariner NJ - Tom 17:35:45 03/28/05 (3)
  • Looking for year of runabout - Craig 17:31:00 03/28/05 (2)
  • Closed cell foam? - Don McC 16:27:43 03/28/05 (11)
  • Wiring Navigation Lights on 12' Jon Boat - pmjasper 13:29:10 03/28/05 (3)
  • Crestliner Aluminum Boat - Dhadley 11:59:38 03/28/05 (1)
  • Flat Bow or Modified V - garnott 11:36:09 03/28/05 (4)
  • Replacing floor on 1989 Strarcraft Mariner 18 ft center console - Walt B 09:19:08 03/28/05 (9)
  • Lowe Quality ? - JimG 03:11:55 03/28/05 (3)
  • Bow light flag staff needed - rizzo 18:42:29 03/27/05 (1)
  • customizing small boat - Magoo 15:08:46 03/27/05 (0)
  • aluminum boat rivets - gunner 13:10:42 03/27/05 (2)
  • Trailing boat and motor - Jason 09:33:15 03/27/05 (1)
  • northwood pontoon fence - zott 08:01:38 03/27/05 (0)
  • 1984 starcraft islander wiring diagram - bill 06:34:06 03/27/05 (2)
  • 18' Cherokee Aluminum boat pictures - woodruff 19:26:57 03/26/05 (5)
  • Trailerboat, Klamath model, History? Facts? - Perry 17:34:24 03/26/05 (1)