Re: Re: Eska 5HP wiring?


[ Ol' Paw's Boat Motor Bulletin Board ] [ Ol' Paw's Fishing Page ]

Posted by Matthew Rakoczy (216.237.197.50) on June 02, 2005 at 05:04:29:

In Reply to: Re: Eska 5HP wiring? posted by TDHoward on June 01, 2005 at 11:45:40:

It is a new spark plug, the plug wire is not bare anywhere that i can see, The key looks to be fine, i have sanded the magnets on the flywheel, i haven't checked to see if the points are clean, i have timed them using a business card, They do open and close on the high and low of the shaft, I guess i need to go buy a condensor. When i broke it down to clean it i am kind of wondering if i don't have it wired back right. There are two wires coming from the coil a wire from the condensor and a cut off wire. I have the condensor and one wire from the coil on the stud coming out from the points, the other wire from the coil i have grounded to the frame of the motor and the shut off wire is attached to the stud from the points as well. Does this sound right?


Durafix Aluminum Repair Rod Demo

See Items Repaired With Durafix