Re: 1926 1/2 horse evenrude coil

[ Ol' Paw's Boat Motor Bulletin Board ] [ Ol' Paw's Fishing Page ]

Posted by Jerry Morgan ( on July 05, 2005 at 05:44:49:

In Reply to: 1926 1/2 horse evenrude coil posted by rusty howle on July 04, 2005 at 08:54:20:

Go to the Antique Outboard Motor Club
Click on "Ads".
Click on "Display".
Click on "Submit, correct, or cancel your own ad".
Read "TIPS and RULES" and place your add.
Volunteers do the listings so it is updated as they have time.
There is an Event page too.
Check for shows and swaps near you.

When asking for parts give a model # as the only 1/2 horse Evinrude was the M# 4263 Mate and the M# 4264 Cub made from 1939 to 1941.

When motors set for a long time the metal surfaces corrode preventing current flow and you won't have any or a week spark. Completely disassemble the ignition system and clean all the metal contact surfaces as well as the points and reassemble. Be sure the plug wire is good and clean or replace the plugs and recheck for spark before you buy anything.

Durafix Aluminum Repair Rod Demo

See Items Repaired With Durafix