Re: Ted Williams 7.5 HP information wanted


[ Ol' Paw's Boat Motor Bulletin Board ] [ Ol' Paw's Fishing Page ]

Posted by Harry (205.250.180.67) on July 14, 2005 at 16:00:30:

In Reply to: Ted Williams 7.5 HP information wanted posted by John Cline on July 10, 2005 at 17:34:25:

4.5 eska/sears,Found little rubber valve,element,#630953pump,on mounting area of carb,I blocked this off with silicon,as couldn't get part,runs fine other than idiots who worked on motor without submerging, burned out my impeller#26251,which I am rebuilding using original metal part of impeller,setting in 1 inch hole,drilled in wood,setting original metal part of impeller in the center,and filling with silicon caulking,remove both with knife,and carefuly carve out 6 up and down blades out of silicon.Diagram #7 if you the have manuel.My original problem was gas was being sucked through diapram,element pump,#630953,into the exhaust, draing your fuel,and flooding motor.


Durafix Aluminum Repair Rod Demo

See Items Repaired With Durafix