Re: 1972 50hp Electric Shift
[ Ol' Paw's Boat Motor Bulletin Board ] [ Ol' Paw's Fishing Page ]
Posted by Greg Mc (126.96.36.199) on August 21, 2005 at 08:33:00:
In Reply to: 1972 50hp Electric Shift posted by Wally Elgert on August 20, 2005 at 18:39:47:
The shift wires come up through a hole in the midsection on the right side of the powerhead. They are in a common sheath and have knife connectors with a rubber insulator over each one.. Slide back the rubber and disconnect the knife connectors. Sometimes its good to work a little WD40 around where the shift cable goes through the hole before trying to pull it down with the lower unit. Hint: do yourself a favor and tie a piece of string to the cable before you pull it out so you will have it to pull the cable back through the hole when you reinstall the lower unit.
|See Items Repaired With Durafix|