Re: 1974 Johnson 50 hp Carb Floats


[ Ol' Paw's Boat Motor Bulletin Board ] [ Ol' Paw's Fishing Page ]

Posted by Ken Denman (24.77.36.232) on September 17, 2005 at 20:56:56:

In Reply to: 1974 Johnson 50 hp Carb Floats posted by tkomuskieman on September 16, 2005 at 08:47:10:

The sluge that glued the floats to the bottom of the bowl may also have clogged some passages in the carb.

To check the float level, remove the float bowl and hold the carb upside down, with the carb bowl mating surface parallel to the ground. The floats should also be parallel to the ground. If not, bend the tang that presses on the valve and re-check.


Durafix Aluminum Repair Rod Demo

See Items Repaired With Durafix