Re: Johnson 18HP Seahorse

[ Ol' Paw's Boat Motor Bulletin Board ] [ Ol' Paw's Fishing Page ]

Posted by Martin ( on September 16, 2004 at 18:07:06:

In Reply to: Re: Johnson 18HP Seahorse posted by Spike on September 16, 2004 at 15:26:14:

As spike says, start with both needle valves out about 1 1/2 turns from closed. However it's best to adjust the idle valve first. But before you do, make sure that the high speed setting is reasonably close. Then adjust the idle valve and finally the high speed valve (slightly to the rich side).

Durafix Aluminum Repair Rod Demo

See Items Repaired With Durafix